Word Count:
537

For the best Patios Dublin company, call Paving Driveways Dublin.

Contrary to most popular beliefs, the concept of robotics is not exactly a new form of technology. According to history, robots have been on the market for so many years now. In fact, the very first documented construction of a working robot was a masterpiece of Jacques de Vaucanson in 1738. Since then, many have attempted and triumphed in building these remarkable mechanical devices.
At RobotShop, you can find almost every kind of robot that you have long wanted. Along wi…

robots, roomba, irobot, scooba, robot toy, robot parts, robotics,, lego mindstorms,robot lawn mower

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Contrary to most popular beliefs, the concept of robotics is not exactly a new form of technology. According to history, robots have been on the market for so many years now. In fact, the very first documented construction of a working robot was a masterpiece of Jacques de Vaucanson in 1738. Since then, many have attempted and triumphed in building these remarkable mechanical devices.
At RobotShop, you can find almost every kind of robot that you have long wanted. Along with its long line of robotics, the robot vacuums come close to perfection as far as freedom from tedious work is concerned.
Of the many functions of robots, the idea to provide people with machines that facilitates and helps lighten the burden of their daily chores is the most solid reason why robots are created. That’s why manufacturers all over the world know the importance of producing robots to meet the needs of household makers, among other markets. Domestic robots are now gaining their own followers. They have been able to help housekeepers worldwide because of their efficient and speedy way of getting the job done.
Robot vacuums are not necessarily reserved to residential use only. They can also be used in shops, offices, school, etc. Built with unmatched power as far as cleaning is concerned, robot vacuums can absolutely make a huge difference in the way people utilize their time in cleaning.
One of the best things about robot vacuums is that they can absolutely clean places that are hard to reach. They have built-in sensors that can warn the robot of its current position and make sure that the robot will not trip over ledges or stairs.
At RobotShop, consumers can choose from a wide variety of robot vacuums, each design has its own remarkable functions.
On top of the list is the powerful line of iRobot Roomba Robot Vacuums. These robot vacuums are specifically built to deliver utmost productivity when it comes to cleaning. In fact, according to statistical reports, iRobot Robot Vacuums Roomba line are the top selling robot vacuums worlwide. Prices range from CAD $250 to CAD $440.
Next is the Karcher RC 3000 Robocleaner. This particular type can actually operate and do the tasks on its own. For instance, if its battery needs to recharge, or when the dustpan is already full, this robot vacuum will find its own way to the docking station. Here, the robot vacuum will also unload its dirt and dust into a 2.0 L vacuum bag.
You can also check out Metapo CleanMate personal cleaning robot. Like any robot vacuum, CleanMate is specially designed to alleviate people from the difficulties of daily cleaning. It is very versatile and can almost clean any kind of surface, from carpet to hard-to-clean surfaces like tiles and hardwood. Best of all, CleanMate is the only robot vacuum that can simultaneously do the cleaning, deodorizing, and sanitizing of the area.
Given all these facts, it can be clearly stated that the dawn of modern cleaning is at hand. With robot vacuums, people can start living a life free from the bondage of cleaning. With domestic robots, you can have more time with your family and do things that are of greater importance than holding a mop.

Word Count:
731

For the best Patios Dublin company, call Paving Driveways Dublin.

The Mies van Der Rohe “Barcelona” Day Bed is an ideal addition to your family room. Comfortable contours and stylish design is the benchmark of this Barcelona Day Bed.The bed has a black walnut wood frame which stands tall on strong steel chromed legs.

Modern Classic Furniture, Retro Furniture, Bauhaus Furniture, Retro Modern Classic Furniture, Mid Century Classics.

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Retro furniture not just sounds interesting; it also has a rich history to be proud of. The word retro has its origin from the 1950s cutting right through the times with current furniture items. The decade produced a diverse range of ideas and innovative furniture. There were many names and designs that revolutionized the furniture era with modern designs like steel tubular furniture, G-plan and other innovative designs that forms the concept of retro.
Retro belongs to mid century classics and includes Bauhaus furniture and lavish leather sofas that left its modern impression and are still much adored. The style is back and its the rage like never before. But before we purchase some classic retro furniture, let us learn a bit about its history. Belonging to the era and before are some names that have steeped the history of retro modern classic furniture. Telling the tale of some unsung and recognized heroes from the times should include,
Eileen Gray: An unsung name, Eileen Gray was a designer and architect who won acclaim quite later in her life. Her designs were modern and had an individualistic mark that inspired both modernists and the Art Deco. Her collaboration with architect and critic Jean Badovici led to introduction of tubular steel furniture, rugs and lighting for her studio and Galerie Jean D sert.
Joseph Hoffman: An Austrian architect and town planner, he was popularly known as “Quadralateral Hoffmann for his passion for geometric forms. His armchairs and sofas in geometric patterns were a rage with modern classic designer and craftsmen. Hoffman`s modern classic work combined the rationalism of Wagner with geometrical, rectilinear style of decoration influenced by Charles R. Mackintosh.
Le Corbusier : Charles-Edouard Jeanneret-Gris, or more popularly known as Le Corbusier (October 6, 1887  August 27, 1965), was a Swiss-born architect, designer, urbanist, writer and painter. Also recognized for his visionary architecture, what now is called Modern Architecture, Le Corbusier started his venture on furniture design in 1928 after inviting the architect, Charlotte Perriand, to join his studio.
Charles Ray Eames: Charles Eames (1907-1978) and his wife started the modern classics trend in the 20th century with their great designs and child-development toys and puzzles. They were a successful couple whose work designs like seating furniture in mesh, metal legged chairs and other revolutionary designs were much admired worldwide.
George Nelson: George Nelson was a visionary architect and designer with rare talent. His work includes Marshmallow sofa, the Nelson platform bench and the first L-shaped desk, a forerunner to the present-day modern workstation. He also designed graphic wall clocks, bubble lamps made of self-webbing plastic and developed forward looking, occasionally futuristic concepts.
Harry Bartoia: A futuristic Italian designer, Harry Bertoia envisioned futuristic designs that inspire people today. His patented Diamond chair for Knoll in 1952 is an unusually beautiful piece of furniture. The unique quality about the chair was its robustness within the light and almost petite frame, making it a huge commercial success. With the success of Diamond chair, the world was introduced to a new materialwire mesh and it was a great icon of modern design.
Marcel Breuer: Marcel Breuer is famous even today for his modern classic designs better known as the Breuer Chairs. Well acclaimed for his Simplistic designs combined with neat lines make these chairs exceptionally popular. The range of Breuer chairs includes Marcel Breuer Cesca Arm Chair, Breuer Wassily Chair, and Marcel Breuer Cesca Chair etc. Besides Breuer Chairs, the Breuer label is also known for Marcel Breuer Bookshelves.
Mies Van Der Rohe: A popular architect of his times, Mies Van Der Rohe built one of his most famous buildings, the German Pavilion at the International Exposition in Barcelona, for which he also created a chair called the Barcelona Chair. He was considered a visionary architect whose work was much acclaimed worldwide.
Retro design furniture from the Fifties onwards includes many designers from the USA as well as Europe and Scandinavia. From the US, designers had a huge impact on furniture production throughout the, world. Once you have decided on a retro theme of furniture like mesh, steel or leather or perhaps a merger of themes, check out for details like color and finish the manufacturer has to offer. Retro is backing the big way. And you can be sure that it will be in vogue. How you team it up with your modern furniture is a creative venture by itself.

Word Count:
626

For the best Patios Dublin company, call Paving Driveways Dublin.

Styles are sometimes fads. Occasionally, there is something classic in a particular style. What is classic, holds value and remains beautiful, while trends pass by within the year. The savvy homeowner, who wants to improve and decorate with a retro flair, should be able to distinguish a classic retro design from trendy fads. Here are some helpful hints to direct you towards the right way to “retro fit” your home.

home improvement, home decoration, interior design, exterior design, california real estate

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Styles are sometimes fads. Occasionally, there is something classic in a particular style. What is classic, holds value and remains beautiful, while trends pass by within the year. The savvy homeowner, who wants to improve and decorate with a retro flair, should be able to distinguish a classic retro design from trendy fads. Here are some helpful hints to direct you towards the right way to “retro fit” your home.
Today’s contemporary look involves a carefully chosen display of classic pieces from the past. Often homeowners are so excited to go retro that they jump into changes that may be too drastic. Think touches, rather than a complete overhaul. Start with a cohesive, overall vision of how you want your home to look, then slowly build on this plan. You will then be able to see where you can push the edges and where you need to exercise restraint. This approach may also save you money in the long run. Touches are not as expensive as overhaul items: retro gas range, retro appliances, etc.
Retro, is a vague term for anything from a relatively distant past. Specify what era you are getting at- perhaps what decade. From here, think of what palette you are adding these touches onto. You might have a home that is Asian inspired. Imagine and visualize an era that suits this style, like certain aspects of the mid century modern period. (1945-1965) From here, you can begin to blend the two dominant styles harmoniously. Your retro additions should serve as complimentary accents that won’t run the risk of looking garish or just plain old.
Another approach to your plan is to concentrate on one room. A new, clean paint job, alongside some colorful vintage glass pieces, could be just the right touch. Speaking of paint, wall color is a simple way to retro-grade a space. Try painting one stand-out wall in a bold nostalgic color. You can then accent the room with pieces that compliment that color. The great things about paint is that is satisfies the urge to go big, or go home. You can make a strong statement with wall color, but if you end up detesting you color choice, re-painting is not the end of the world.
Personalization is important. Pick retro pieces that inspire you, and that you love. Don’t choose something simply because it belongs in the era you are decorating with.
If you are looking for retro touches, the mid century modern era is easy to start with. You can hunt for unique pieces that are funky, yet classic in design. What came out of the mid century modern design movement, was the production of pieces that were all about economy; economy in terms of price, but also in relation to space and design. The dominant style of this era focused on function, simplicity and natural shapes. Many furniture designers of this era had backgrounds in sculpture. Pieces of the mid century modern era worked with classic lines based on logic and elegance. It is hard to go wrong with classic lines.
Here are some ideas for retro or retro inspired mid century pieces to accent your home. It is great if you can find originals that you love. In this day and age, there are also multitudes of great knock-offs out there.
– Teak furniture, new or used (1950’s)
– Blenko Glass, new or used (1060’s)
– Modern wall clocks (1950-1960’s)
– Sussex Credenza (1950-60’s)
– Eames plywood chair (1950-60’s)
– Noguchi Table (1950-60’s)
Remember, however you go about adding retro flair, a home that is put together with a careful, artistic eye, is a beautiful home. Enjoy the process and the hunt, as you bring together the past and present for a classic home d cor, with a new retro look.

Word Count:
445

For the best Patios Dublin company, call Paving Driveways Dublin.

Awnings are a great way to improve your home, especially sunsetter awnings

sunsetter awning, sunsetter awnings, sunsetter retractable awnings

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
A Sunsetter awning is the Mercedes Benz of awnings. When you are looking for the top of the line retractable awnings, Sunsetter is the brand name you need to look for. This company offers three different models of awnings as well as the Sunsetter EasyShade to help you block out the heat of the sun. One of the features you can enjoy with the top rated Sunsetter awning is that you can operate the motor with a remote control.
The top selling and most expensive Sunsetter awning is the Pro Motorized awning. This model of Sunsetter awnings has a weather breaker panel integrated with the front bar. This is a screen that you can roll down in front of these Sunsetter retractable awnings to protect you from the breeze blowing the napkins off the patio table. Although it will block about 60% of the suns rays, this feature of the awning will still allow light to filter through. It unrolls in seconds, but it is not motorized like the retractable awning. A few cranks of the hand mechanism are all it will take to have it in place.
When you use the Pro Motorized Sunsetter awning, you have to use a remote control for opening and closing. The motor used in these Sunsetter awnings is the best you can get  the Somfy RTS. When you install the Sunsetter retractable awnings you have to purchase the roof brackets separately and you can set the pitch you want for the awning at this time. The pitch of the awning is preset at the factory at a 29 – inch drop, but you can lower it to 45 inches.
The same motor as in the Pro Motorized Sunsetter awning also powers the regular models of Sunsetter awnings. They also opens easily with one touch of the remote control. The only difference with these Sunsetter retractable awnings is that you dont get the weather breaker addition. You can mount in heights as low as 7.5 feet and install it over siding, vinyl, wood or brick. The fabric of the awning is made from 5 layers giving you a rugged material that will withstand the elements of weather.
Sunsetter awnings fit most homes and offers about 182 square feet of protection. In case of a power outage, there is a manual override on the Sunsetter awning so that you can close it manually. Not only are these awnings economical and easy to use, but the Sunsetter brand leads the way in the awning industry with products unmatched by other manufacturers. The fabric is 100% waterproof and is guaranteed never to leak. When you purchase a Sunsetter awning, you have an awning that will last for years.

Word Count:
482

For the best Patios Dublin company, call Paving Driveways Dublin.

Retractable awnings are the best awnings you can get. There is nothing else as convenient.

retractable awnings, retractable awning, retractible awning

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Retractable awnings add the perfect ambiance to the deck on your home. With an awning that you can roll up when necessary, you dont have to worry about the material ripping in the wind or tearing under the weight of the snow. With the motorized retractable models of awnings, you have the convenience of being able to roll up the retractible awning with just the touch of a button. You install the switch for the retractable awnings outside the home, but these are completely weatherproof. You wont have any worries about it not functioning in heavy rain or wind.
Even if you lose the power during a storm, you can still roll up a retractible awning. Retractable awning manufacturers are very careful to install a manual override so that you can winch in the awning by hand if you need to. Most retractable awnings do not have any poles, which might cause you to wonder what holds them in place. These awnings are designed to be self-supporting. Each retractible awning has a secure mounting with heavy-duty arms for support. There are internal springs that create the arm tension and large radius elbows help to keep the awning fabric taut at all times.
When you have a retractable awning over your patio, rolling it up will help to store it for winter. Therefore, you dont have to disassemble the awning in the fall and reinstall it in the spring. You can remove the loose hangings from the retractable awnings during the winter, but many homeowners dont do anything. It really depends on where you live. In some climates, it is possible to leave the retractible awnings up all year long.
The main purpose of retractable awnings is to provide shade from the sun. There will be times when you dont need to use the retractible awning when you are sitting outside, so you can leave it in the rolled up position. However, awnings are not designed to handle a high wind velocity. For this reason, you can get a retractable awning that contains a wind sensor. When the wind speed picks up, the sensor automatically activates the switch, retracting the awning for you. Experts on retractible models of awnings recommend that if you can comfortably read the newspaper outdoors, then it is safe to have the awning extended.
There is nothing as convenient as retractable awnings, whether you have the manual or automatic models. Even the manual models only take a few cranks of the hand mechanism to have the awning rolled back out of the way. The lightweight fabrics used in retractible awnings are guaranteed against rot and mildew and the warranty covers all defects for up to five years. When you take care of the retractable awnings according to the manufacturers instructions, you should be able to have an awning that lasts for 8 to 12 years.

Word Count:
606

For the best Patios Dublin company, call Paving Driveways Dublin.

Retractable awnings provide sun and heat protection, while reducing energy bills and improving the value of your home.

awnings, awning, retractable awnings, patio covers

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Looking for a way to reduce your electric bills or just improve the exterior appearance of your house? Investing in retractable awnings can do all that and much, much more. The top ten reasons to invest in retractable awnings starts and ends with sun and heat protection.
Whether you live in the Northeast or the Southwest, the summer sun can be merciless as it beats down on your patio, your windows or your business. The solution is to install a retractable awning developed from the strictest engineering standards and made from the highest quality materials.
Before the summer sun peaks in the sky, its time to make your ideal patio dreams come true. Imagine sitting beneath the cool shade afforded by the retractable awning with no worry about fading, cleaning or wear and tear. The wind is not going to rip it away, the rain is not going to rust it and you can program it to retract to meet different conditions. Businesspersons and homeowners alike can appreciate the convenience; the quality and the atmosphere a retractable awning can deliver.
So just what is that makes retractable awnings so impressive? Check this list out:
10. European engineering and design makes even the largest retractable awnings not only possible, but also desirable for commercial & residential use. For states where outdoor seating areas are growing in popularity at restaurants, the large options are the best options.
9. Set the controls to your preferences, whether you want the switch to be indoors, outdoors or available on a remote control.
8. Fading isnt an issue. Your colorful umbrellas will fade. Your permanent addition can rust. Your aluminum frame retractable awning with solution dyed acrylic fabric will not rust nor will it fade within the manufacturers warranty.
7. Energy efficiency is at a premium with deregulation of power companies and rising gas prices. Retractable awnings can reduce heat on the interior of a home or a business by as much as 77 percent according to a study by the American Society of Heating and Air Conditioning Engineers (ASHRAE). Factor the effects of those savings on your utility bills.
6. Adding room without construction costs. Your retractable awning can add a great patio area for a restaurant or an outside lounging area to your home. A retractable awning is a great deal less expensive than a permanent structure.
5. The are numerous sensor options available for making the retractable awning exactly what you would like it to be whether you live in a hurricane prone area or a hot, dry desert. Wind, sun and rain are no problem.
4. Little to no maintenance is required. Retractable awning manufacturers back their product with up to a 25 year warranty.
3. Improving the exterior appearance of your home while enjoying the benefits of shade. Retractable awnings come in a variety of styles and colors. Whether decorating for an Italian villa, a beach house or a country farmhouse, retractable awnings can match any facade.
2. Rain protection makes up a smaller percentage of retractable awnings sales. Whether the awning provides a place for customers to get out of a gentle shower or just allows you to sit out on the patio during a warm, spring rain (with sufficient pitch); the retractable awning offers a great look and protection rolled into one.
1. First rate sun and heat protection that can make late afternoons and evenings on the porch or deck a pleasurable experience. The majority of customers looking into retractable awnings are doing so for sun protection. Why sit under the sun or ducking your head under an umbrella, when a retractable awning provides full area coverage and all the shade you could desire?

Word Count:
817

For the best Patios Dublin company, call Paving Driveways Dublin.

Learn how to replace your old woodf sash windows with energy efficient vinyl replacement windows

Vinyl windows, replacement windows, how to install windows, installing vinyl windows

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
When we left off last week, we had removed the old wood sash windows and prepared the opening for the vinyl replacement windows. Now it’s time to install your new windows. You should have someone there to help you when doing the installation. First, Remove all shipping materials from the window. Now, if you are installing several different sizes, make sure you are putting the correct window in the correct opening. You need to put the window into the opening to make sure it’s going to fit, then remove it and run a bead of caulk on the face of the outside blind stop where the window will rest. You don’t want to caulk, only to discover the windows are too big. It’s worth the extra few minutes to make sure it’s going to fit. Lift the window and set the bottom in first. Then raise the top until it rests against the outside blind stops. Sometimes, when raising the top into position, the window frame will hit the top of the wood frame. You need to tPDD1 down on the top of the vinyl frame while keeping pressure towards the outside.
Once you determine that it’s going to fit, remove the new window and set it aside. Run a bead of caulk on the face of the outside blind stops. White latex painters caulk works fine. Raise the window into position again. Now have your helper hold the window in position while you raise and lower the sashes, making certain that the window is square in the opening. Remember how you ordered the windows 3/16″- 1/4″ shorter than the tightest measurement? This is where you use this space to adjust the frame to be the most plumb and level. Get a box of popsicle sticks and wood coffee stirrers at the grocery store. The coffee stirrers are about 1/16″ thick, and the popsicle sticks are approximately twice as thick. You want to put the shims in the four corners. Then caulk the gPDD1 on both sides and along the top before installing the inside stops. I don’t recommend putting any screws in the sides, but you can put one screw in the top center and one in the bottom center. You really dont have to use any screws in this kind of installation, since the shims will eliminate any side play, and the caulk on the blind stops will hold the frame in place as well. Remember, we still need to re-install the inside stops.
Before installing the inside stops, remove all the old nails and replace them with new nails. A 1″- 1 1/4″ finish nail is fine. Before installing the inside stops, scrape all old caulk off the stops. Then, while your helper holds the window in place, nail your stops back on. If the window has 4 stops, install the shortest ones first. That way you can bend the longer stops into place between the two short ones. Use a nail punch to sink the head past the surface of the stop. If you have several windows to do, i suggest doing the first window to this point before going to the next. How frustrating would it be to have a helper removing the old sashes, only to discover that the windows aren’t going to fit!? If the first one goes in fine, then you can send your helper ahead of you to start removing old sashes. The best way to avoid the nightmare of having a bunch of new windows that won’t fit is to make sure you measure CORRECTLY. Remember, tight minus 1/4″ on the width and height should be fine.
Finish the inside by caulking the area of the inside stop where it meets the casing, and the point where the stop meets the new frame. Fill the nail holes in the inside stops with caulk to hide the nail heads. Now it’s time to finish the outside. A quality replacement window will either have a sloped frame to match the slope sill, or it will come with an insert that fits under the new frame to fill the gPDD1 created by the sloping wood sill. If you buy a lower grade window that doesn’t come with anything to fill the gPDD1 underneath, you can buy some wood trim to fill the space, or you can get a flat vinyl trim that attaches to the face of the bottom of the new frame. The flat trim is available on my website under the “shop” tab. Once you cover the bottom gap, it’s time to caulk where the outside blind stops meet the vinyl frame, and where the bottom gPDD1 filler meets the wood sill.
That’s it! You’re done! You can buy accessories to cover your old wood sills with a vinyl wrPDD1 extrusion. That can also be found on the website under the “purchase trim” tab. Next week we are going to start on replacing old aluminum windows.

Word Count:
710

For the best Patios Dublin company, call Paving Driveways Dublin.

Learn how to remove your metal frame windows and replace them with energy efficient vinyl replacement windows.

Vinyl windows, replacement windows, how to install windows, installing vinyl windows

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
In our past articles I talked about all the steps required to properly replace your old wood sash windows with energy efficient vinyl windows. I told you how to measure for the new windows. Then we discussed the removal of the wood sashes and parting bead. Finally, I told you how to install, seal, and trim the vinyl replacement windows. But, what if those old windows in your home are made of aluminum instead of wood? Is the process the same? No, it’s not the same at all. So, the next few articles are going to explain the differences between replacing wood windows versus aluminum windows.
When discussing the proper frame style for replacing the wood sash windows, I explained the difference between new construction frames versus replacement frames. When replacing aluminum windows, there is another option we have to consider regarding frame style. It’s called a “retrofit” frame. Let’s go over each frame type. First, we have the new construction frame with the nailing fin. If you choose to go this route, you have to remove the exterior around each window opening, pull out the nails holding the aluminum window to the studs, nail in the new vinyl window, apply flashing, caulk, and re-install the exterior around each window.(I get tired just talking about it!)In addition to being a whole lot of labor, you can run into major problems trying to install the exterior product around each window opening. If your home has stucco, you have to try and match the rest of the stucco. It can be done, but not by you. Even most professional stucco guys can’t get a perfect match. What if you have wood siding? Well, you can cut away 2″ of the siding around each window to get to the nail fin, then you can apply 1 X 2 or 1 X 3 trim around each window. Certainly not as much work as the stucco home, but probably more work than the average homeowner cares to tackle. What if each window is surrounded by brick? Let’s not even go there! You would have to remove the bricks, then re-install them all when finished.
Trust me, you don’t want to replace your old aluminum windows with new construction vinyl windows. You want to use either the replacement frame like the one used to replace the wood sash windows, or something called a retrofit frame , that is popular in the west where stucco is a common exterior. Since the procedure for measuring is the same regardless of the frame style chosen, this article will discuss the proper measuring procedure, and future articles will explain the difference in the installation process for replacement versus retrofit.
If you look at the portion of the aluminum frame that goes around the window opening into your surrounding walls, you will see three separate “legs” that form two pockets. The outside leg and the center leg form the first pocket. Your screen and stationary panel will be in this pocket. The center leg and inside leg form the second pocket, and your sliding panel is in that pocket. Find the “leg” that is the widest on all four sides. When measuring the width, run your tape measure from the widest leg on the left to the widest leg on the right. This should be the narrowest measurement. Then, subtract 3/8″ from that measurement. This is the width of the replacement window. Measure the height the same way. When measuring the height, measure as close to the center of the window as possible. This is especially important on windows wider than six feet, because the top wood header has a tendency to sag over time, making the center of the opening the narrowest. You don’t need to deduct 3/8″ from the height like you did on the width. 1/4″ is fine. These are the dimensions you use when ordering your vinyl window. If you have any picture windows(windows without a vent panel), there will only be two legs and one pocket. You still measure the same way.
Next week I will discuss whether your home is a candidate for retrofit frames or replacement frames..
John Rocco has been installing
replacement windows since 1978
To learn more, visit How To Install Windows

Word Count:
402

For the best Patios Dublin company, call Paving Driveways Dublin.

Chandeliers add an elegance and style to a room that no other lighting fixture can even come close to. It is not surprising that when a chandeleir gets old or broken that it is not just thrown away, but repaired. Replacing chandelier parts takes precision and careful shopping. One bad part and the whole chandeleir can lose its charm.
Usually when replacing parts on a chandelier, only some parts are being replaced. It is important to make sure that any new parts match the …

chandeliers, glass lights, light fittings

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
Chandeliers add an elegance and style to a room that no other lighting fixture can even come close to. It is not surprising that when a chandeleir gets old or broken that it is not just thrown away, but repaired. Replacing chandelier parts takes precision and careful shopping. One bad part and the whole chandeleir can lose its charm.
Usually when replacing parts on a chandelier, only some parts are being replaced. It is important to make sure that any new parts match the old parts. Doing this involves careful consideration of size and shape. Even the slightest difference in a decorative part could throw the whole chandeleir off in apperance. When it comes to other parts that make up the actual construction, wrong sizing could spell disaster. To ensure correct parts are chosen, measuring should be done in a meticulous fashion. It is important to measure exact lengths and widths. If possible, take the piece to be replaced so it can be compared at the store.
Quality is another important consideration when choosing replacement chandelier parts. Quality does not mean it has to be expensive. It should look similar to the other chandeleir parts. A cheaply made piece will look completely out of place amoungst pieces of high quality. It is posible to find less expensive parts that are of an equal quality to the original parts.
Chandeleir parts can be found in many different types of stores. Some parts may be found at a general department store in their lighting or hardware sections. Mostly hardware should be bought at department stores because the look of these parts is not as important. The decorative parts found at a department store may not match exactly or may look chePDD1 against the original parts. The best place to find decorative parts is at a store that sells chandeleirs and has specialized chandelier parts available. The bottom line is not to forget that the new parts should match the old parts.
The biggest challenge when replacing chandlelier parts is making the new match the old. The main factors of size, shape and quality make a huge impact on the chandeleir. Replacement parts should be carefully matched to the old parts so that they are not noticable. Parts should be bought with the finished piece in mind. The chandeleir should look as good with replacement parts as it did when it was brand new.

Word Count:
892

For the best Patios Dublin company, call Paving Driveways Dublin.

Determine whether to replace your aluminum frame windows with either vinyl retrofit windows or vinyl replacement windows.

Vinyl Windows, vinyl replacement windows, retrofit windows, installing vinyl windows, how to install windows, replacing house windows, installing replacement windows

To find the best Patios Dublin company, click here for Paving Driveways Dublin.
In previous articles, I explained to you how to determine whether your windows are candidates for vinyl replacement style frames or retrofit style frames. This week I’m going to explain the installation techniques for both frame styles. Let’s start with the retrofit frame.
Retrofit window installation is really the easiest of all. The retrofit window already comes with an exterior trim attached. That’s the flush fin that goes against the outside surface, usually stucco. Prepare the window by drilling 3/8″ holes in the areas of the frame where you want to screw it in place. Normally, there will be 3 holes on each side and 3 more across the top. Don’t predrill any holes in the bottom track. After removing the old panels, you want to run a heavy bead of caulk on the face of the old aluminum frame that you left in place. Then you and a helper set the bottom of the vinyl window onto the old aluminum bottom track and raise it into position. The flush fin or retrofit lip will act as a “stop” to hold the window in place. Have your helper hold the window while you go inside.
Once inside, you want to center the window in the opening. Slide the vent panel open and closed to make sure the window is plumb and level. To adjust for out of square conditions, shim the bottom right or left corner by placing a shimming material between the sill and bottom of the window frame. Once square, drive a 3″ deck screw through the 3/8″ holes and into the wood studs.Just seat the screw, don’t overtighten. After you get the screws into the sides and top, remove the sliding panel. The bottom track should lift out. Look for drainage holes in the track and insert a thin screwdriver and lift up. Drive one screw in the bottom center, caulk around the screw head, then put the track back in place and re-install the sliding panel. Now, you want to go back outside and caulk the gPDD1 where the retrofit fin meets the exterior surface of the house. You want to have a double barrier of protection against water infiltration. Remember, you already applied a generous bead of caulk before inserting the new frame into the opening. The rest of the job is done on the inside.
First, you want to plug the 3/8″ screw holes to hide the heads of the screws. We sell the hole plugs on the website. Just click on the “Purchase Trim” tab to see a picture. The plugs will pop into place in the hole. The next step is to fill the gPDD1 around the new frame with R-13 Insulation. Do not use the foam insulation that comes in a can. Many manufacturers will not honor the warranty if the foam is used. Even the non expanding foams can cause the frame to distort, causing problems. Pack the insulation in tight. You might want to wear a dust mask during this procedure. Many people, myself included, are very sensitive to insulation. After the insulation is in place, you want to install trim around the inside to finish the job. You can use wood trim from the hardware store, or some other product. But in my experience, the best product is a vinyl flat trim that matches the window frame. The flat trim can also be purchased on the website under the “Purchase Trim” tab, or you could try to find it from a local window contractor. Ours comes in 2 different widths, although the 1 3/4″ wide piece is by far the most common. The trim has a double sided adhesive tape on the back. You cut the top and bottom first, stick them on the vinyl frame, making sure the trim goes to the drywall. This covers all the insulation and the old metal frame. Do the side pieces next. The final step is to caulk where the trim meets the walls.
Much of the installation process for a replacement frame is the same as the retrofit frame. But, there are a few differences. When you put the new window into the opening using a replacement frame, you don’t have the flush fin holding the frame in place. You and your helper have to hold the frame in place while you put a screw in the top center to support the frame. Then, you can do your adjusting for a square condition. All of the procedures on the inside will be exactly the same, from hole plugs, to insulation, to trim and caulk. The outside is different. You have to apply the trim that was part of the retrofit frame. Again, I prefer the flat trim. Once again, you apply a bead of caulk to the old frame,then measure and cut the top and bottom trim pieces. Apply the adhesive part of the trim to the vinyl frame, and let the other part contact the bead of caulk. Trim all four sides, then caulk again where the trim meets the exterior material.
As you can see, it really doesn’t matter if the exterior of your home is brick, stone, siding, or stucco. You can install vinyl windows without having to damage the surrounding structure. We have step by step instructional videos for sale on the website at How To Install Windows